support

Available on both mobile and PC

Network distribution test steps 1. Connect the micro inverter to the DC component and observe whether the indicator light is on 2. Turn on the Bluetooth and WIFI of the mobile phone, connect to the home wifi, and make sure that the Wi-Fi has Ethernet 3. Open the APP and create a power station as shown in the video 4. Scan the QR code on the nameplate as mentioned above. If the mobile phone cannot recognize the scan, please choose to manually enter the SN code at the QR code 5. After the above steps, please wait for the connection. If the connection cannot be successful, please select the prompt interface AP connection. 6. Select home WIFI and enter the home WIFI password. Follow the prompts to jump to the WIFI connection interface, select the AP on the SN connection and enter the password (the password is on the nameplate below the SN code) 7. After the connection is successful, follow the prompts to jump and wait for the connection to be successful 8. After success, wait for 3 minutes and it will show that the collector is online, and after 3 minutes it will show that the inverter is online. 9. It can be used normally 10. If the above cannot be connected, you can use the computer operation

The capacity of a typical home Wi-Fi router is to connect 15 to 30 devices simultaneously. However, this varies by router model and brand. Some factors that may affect the number of devices connected to your Wi-Fi router include available bandwidth, the distance between the router and the devices, and the type of activity performed by the connected devices. If you need to connect more devices and have a stable connection than your Wi-Fi router can support, consider using a Wi-Fi extender or installing a second router to connect to the micro-inverter separately.

Wi-Fi - In an open area, the communication distance can reach 305 meters, and in a closed area, the communication distance is 76 meters to 122 meters. The above is experimental data. In fact, considering the signal influence between devices and the obstruction of walls, it is recommended that the router should not be more than 50 meters away from the micro inverter.

The conversion rate of our products in laboratory tests is 96%, and the actual application is about 93%, which exceeds most brands.

The power varies according to the model. Please refer to our product specifications for reference data for details.

<3%

We can set it according to different countries.

The rated output power of our products is consistent with the actual nominal value. The maximum output power will be about 3% higher than the rated output power. In actual testing, the upper limit will be higher and there will be deviations. At present, when the working temperature of our products exceeds 75℃ to 80℃, the protection will be triggered. The power will be modulated and floated down by about 10%.